SOLAR MPPT 50A REGULATOR

This is a genuine MPPT (Maximum Power Point Tracking)

It is high quality, commercial grade & will gain you up to 30% more power generation than any standard solar regulator which allows full use of your solar panels.

It deeply disappoints me the amount of sellers misrepresenting MPPT solar regulators.

A quality MPPT solar regulator will accept between 120V & 150V from your solar panel.

This has many advantages, less current loss, lighter wiring, series connection of panels.

Do not be confused by the use of watts instead of volts.

It is the volts that matter.

  • It will auto select your battery bank voltage, 12V, 24V, 36V, 48V.
  • It will log & clearly display your daily charge rates.
  • It is temperature sensitive compensating.
  • It will carefully maintain your batteries by not over charging or discharging them.
  • Compatible with all known lead acid batteries, Flooded, Gel, AGM etc.
  • It is compatible & programmable with many add-ons if required.
  • It weighs over 4Kg because of all the circuitry & heat compensation it takes to run a genuine MPPT.

  Unfortunately a genuine maximum power point tracking regulator is not cheap. It is impossible to achieve this level of quality at a bargain price. You get what you pay for, in this case, quality.

Characteristics:

Battery charge management, state of charge information.

Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and 90 days of energy-harvest history is stored in the solar charger.

Continuous output Power Rating without de-rating at up to 50°C ambient temperature.

Supports Flooded Lead Acid (FLA), GEL, and Absorbed Glass Mat (AGM) batteries, 2/3/4 Stage charging with adjustable set point.

Wire the PV modules in series up to 112VDC normal (140VDC Max).

Built-in temperature compensation function for safe and complete charging.

 

Model No. PM-SCC-50AM
Maximum output current
(Continuous at up 50°C ambient temperature)		 50 Amps
Battery Voltages 12, 24, 36, 48 VDC Normal
Max PV Input Current 40 Amps
Input Voltage Range 16~112 VDC Operating
Input Voltage Range 140 VDC Maximum Open Circuit Voltage
Max PV Array Power 3250 Watts
(Maximum when equalizing a 48V battery to 64V at 50 Amps)
Charge Regulation Modes Bulk, Absorption, Float, Auto/ Manual Equalization
Battery Temperature Compensation 5.0 mV per°C, per 2 volt cell
DC to DC Conversion Capability 12V Battery: 16~112 VDC
  24V Battery: 32~112 VDC
  36V Battery: 48~112 VDC
  48V Battery: 64~112 VDC
Display Status Built-in 2-line, 20-character LCD with backlight
LCD status screen displays input voltage and current,
output voltage and current, charge-mode, Battery SOC
Data Logging Logs energy harvested for 90 days, LCD displays WH, KWH, AH
Energy Monitor LCD shows SOC, AH, WH, and present charge or discharge current.
A 50mV/ 500Amp shunt is required to use
Auxiliary Relays Two independent relays with from A (SPST) contacts
for control of external devices. Contact rating is 3 Amps, 50VDC
Operation Temperature Full Power Output to +50°C ambient
Standby Power < 2 Watts
Dimensions 267.6 x 196 x 147 mm
Weight 4.3 Kgs